Product Description
Motorcycle Battery
Specification
MB Item Number: KBT4BB
Voltage12
CCA 40
Capacity (10HR) 2
Weight 1.05kg / 2.31lbs
Dimensions (in / mm) L: 4.45 (113) W: 1.50 (38) H: 3.43 (87)
Assembly Figure
Terminal Locations 2
Terminal 2, (Spade)
Screws NA
Allen Wrench NA
Terminal Caps NA
Spacer None
Case Color Yellow
Cap Style NA
ReplacesYT4BBS
SRPNA
Application
SUZUKI DR-Z70 (08-09) - 70CC
YAMAHA TTR50E (06-07) - 50CC
YAMAHA TTR90E Electric Start (03-07) - 90CC
YAMAHA SR400 (01-09) - 400CC
YAMAHA SR400(FI) (10-12) - 400CC
Installation Guide
Check that you have a set of terminals, fastening screws and / or cable connectors inside the battery carton with the battery. All batteries come with the appropriate wrench, terminals, connectors and/or spacers for proper fitment.
Check the battery voltage to assure that it is fully charged somewhere between12.85V and 12.7V.
Match the terminal placement and height and/or width adaptor compared to your old battery. Do not be concerned if you do not need to use all of the spacers, if any to match your old batteries size simply don't use them.
Lift off the protective red and black caps with a small screwdriver or knife. The threaded brass button terminals will be revealed. If you are not using a side spacer or additional accessories, be sure to use the appropriate red and black caps to plug the unused terminals.
Attach terminals with stainless steel hex cap screws in appropriate location for the required polarity. It is not
Necessary to put thread locker on the terminal screws as the threaded button type terminals in the batteries are tapered for a lock- fit. Unlike the small OE battery terminal bolt and nut fitment, the cap screws are very easy to fit onto the threaded brass terminals using the hex key included in the box. Do not over tighten.
Place your Koyama battery in your vehicle and install battery cables to the brass terminals on the battery with the wrench and stainless steel cap screws provided.
MB Item Number |
MBT4BB |
Voltage |
12 |
CCA |
40 |
Capacity (10HR) |
2 |
Weight |
1.05kg / 2.31lbs |
Dimensions (in / mm) |
L: 4.45 (113) W: 1.50 (38) H: 3.43 (87) |
Assembly Figure
Terminal Locations |
2 |
|
Terminal |
2, (Spade) |
Screws |
NA |
Allen Wrench |
NA |
Terminal Caps |
NA |
Spacer |
None |
Case Color |
Yellow |
Cap Style |
NA |
Replaces |
YT4BBS |
SRP |
NA |